Phone - KTM 890 ADVENTURE 2022 Owner's Manual

7.26.5

Phone

Info
The Bluetooth
with KTM MY RIDE.
When the Bluetooth
is connected, the Bluetooth
of the combination instrument.
Not every cellphone and headset is suitable for pairing with
the combination instrument.
Condition
• The motorcycle is stationary.
• Function Bluetooth activated.
• The Bluetooth
to be paired.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until KTM MY RIDE is marked.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Pairing is marked. Press
F01792-01
the SET button to open the submenu.
–
Press the UP or DOWN button until Phone is marked. Press the
SET button to open the submenu.
Info
Only one cellphone can be paired with the combination
instrument.
–
Press the UP or DOWN button until Pairing is marked. Press the
SET button to open the submenu.
–
The combination instrument starts searching for a suitable
cellphone. If the search was successful, the name of the cell-
phone is displayed in the Pairing submenu. Press the SET but-
ton to start the pairing.
Info
The cellphone must be visible via Bluetooth
cellphone to be found by the combination instrument.
–
A message appears on the combination instrument indicat-
ing that this is now ready for pairing. The pairing is completed
successfully by confirming the Passkey on the cellphone and
on the combination instrument.
Info
Once the pairing is completed, the name of the paired
cellphone is displayed in the Phone submenu.
Press the UP or DOWN button until the paired device is
marked. The paired device can be deleted by pressing
the SET button.
Not every cellphone is suitable for pairing with the
combination instrument.
–
Move the previously paired device into the range of the combi-
nation instrument while the Bluetooth
COMBINATION INSTRUMENT 7
® function can only be used in conjunction
® function is switched on and the device
® symbol appears in the display
® function should also be activated in the device
® function is active.
® for the
41