Drl - KTM 890 ADVENTURE 2022 Owner's Manual

7 COMBINATION INSTRUMENT

7.26.37 DRL

56
Setting the date
–
Press UP or DOWN button until the date is marked.
–
Press SET button.
The day flashes and is underlined.
–
Press UP or DOWN button until the current day is set.
–
Press SET button.
The month flashes and is underlined.
–
Press UP or DOWN button until the current month is set.
F01820-01 –
Press the SET button.
The year flashes and is underlined.
–
Press UP or DOWN button until the current year is set.
–
Press SET button.
The date is stored.
Condition
• The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until DRL is marked. Press
the SET button to open the submenu.
Warning
F01821-01
Danger of accidents When visibility is poor, the day-
time running light is not a substitute for the low beam.
Automatic switching between the daytime running
light and low beam may only be partially available
when visibility is significantly impaired due to fog,
snow or rain.
–
Ensure that the appropriate type of lighting is
always selected.
–
If necessary switch off the daytime running lights
using the menu before going on a ride or when
stopped so that the low beam is switched on per-
manently.
–
Make sure that the daytime running light is deac-
tivated with the diagnostics tool when the menu
item is not available, but the low beam is required.
(Your authorized KTM workshop will be glad to
help.)
–
Note the legal regulations regarding the daytime
running light.
–
Activate menu item using the UP or DOWN button.
–
Press the SET button to switch the daytime running light on or
off.