KTM 890 ADVENTURE 2022 Owner's Manual page 127

Info
Even when there is no load on the 12-V battery, it discharges steadily each day.
The charging level and the method of charging are very important for the service life of the 12-V battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, or charging time is exceeded, electrolyte escapes through the
safety valves. This reduces the capacity of the 12-V battery.
If the 12-V battery is depleted from starting the vehicle repeatedly, the battery must be charged immedi-
ately.
If the 12-V battery is left in a discharged state for an extended period, it will become deeply discharged
and sulfating occurs, destroying the battery.
The 12-V battery is maintenance-free. The acid level does not have to be checked.
F03300-10
F03612-01
Preparatory work
–
Remove the passenger seat. (
–
Remove the front rider's seat. (
–
Remove the battery cover. (
Main work
–
Disconnect negative cable
damaging the onboard electronics.
–
Remove positive terminal cover
–
Connect a battery charger to the 12-V battery. Connect the
battery charger to the mains connection.
Battery charger (58429074200)
It is impossible to overcharge the 12‑V battery using this bat-
tery charger.
This battery charger is not suitable for lithium-ion batteries.
Info
Charge the 12-V battery to a maximum of 10% of the
capacity specified on the battery housing.
–
Disconnect the battery charger from the mains connection and
the 12-V battery after charging.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
ELECTRICAL SYSTEM 16
p. 84)
p. 85)
p. 92)
1
from the 12 V battery to avoid
2
.
3 months
125