General Info; Trip 1; Trip 2 - KTM 890 ADVENTURE 2022 Owner's Manual

7 COMBINATION INSTRUMENT
7.26.9

7.26.10 Trip 1

7.26.11 Trip 2

44

General Info

F01796-01
F01797-01
F01798-01
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Trips/Data is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until General Info is marked.
Press the SET button to open the submenu.
In the submenu General Info, the date, total route ridden and bat-
tery voltage of the 12-V battery can be viewed.
Info
Date shows the date.
ODO shows the total distance covered.
Battery shows the battery voltage of the 12-V battery.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Trips/Data is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until Trip 1 is marked. Press
the SET button to open the submenu.
Information on Trip 1 can be viewed in the Trip 1 submenu.
Info
Trip shows the distance since the last reset, such as
between two refueling stops. Trip is running and counts up
to 9999.
ØCons indicates the average fuel consumption based
on Trip.
ØSpeed indicates the average speed based on Trip
and Trip Time.
Trip Time shows the journey time on the basis of Trip and
runs as soon as a speed signal is received.
Fuel Range indicates the possible distance you can cover
with the fuel reserve.
All the entries in the Trip 1 submenu are reset.
Press and
hold the SET
button for 3 -
5 seconds.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Trips/Data is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until Trip 2 is marked. Press
the SET button to open the submenu.
Information on Trip 2 can be viewed in the Trip 2 submenu.