Setting The User Password - HP Vectra VL600 Supplementary Manual

How to Set a User
Password
4 Managing Your PC
Setting Passwords

Setting the User Password

A User password can only be set if an Administrator password has
already been set.
The User Password provides these security features:
Automatic keyboard lock at startup to enable remote management,
•
but prevent unauthorized access.
A keyboard lock timer to automatically lock your PC after a specified
•
number of minutes of keyboard inactivity—you must type the
password and press
If you have set both an Administrator password and a User password,
and you enter the Setup program by using the User password, you will
be restricted in your ability to change setup items. If you enter the
Setup program with an Administrator password, you will have no
restrictions.
To set a User password:
1 Enter the Setup program, by pressing
2 Select the Security menu group.
3 Select the "User Password" submenu.
4 Choose the "Set User Password" setup item. You will be asked to
enter your password twice. Save your changes when you exit the
Setup program by selecting "Exit", then "Save and Exit".
To remove the password, follow the same procedure as to set a
password. You will be asked to enter the existing password first. Then,
for the new password, leave the password field blank and press
To confirm your choice, press
122
to unlock the keyboard.
Enter
F2
a second time.
Enter
during startup.
Enter
.