Page 1
HP Locks for Master Pass Key System (for HP Vectra VL600 Minitower models) Installation Guide Installationsanleitung Guide d’installation Guía de instalación Guida all’installazione English Deutsch Français Español Italiano www.hp.com/go/pcaccessories...
Page 3
English ....Chapter 1 Deutsch....Kapitel 2 Français ....Chapitre 3 Español .
Page 5
Chapter 1 HP Locks for Master Pass Key System This manual describes how to install an HP lock in your PC. This lock can either be opened with the key provided or, if configured before installation in the PC, with the Master Pass Key, which is available from HP as a separate accessory.
Page 6
Installing the Lock in the PC Installing the Lock in the PC NOTE If you want to program the lock for use with a Master Pass Key, refer to the Master Pass Key System User’s Guide, provided with the Master Pass Key System accessory. Program the lock before fitting it in the PC.
This HP accessory is covered by a limited hardware warranty for a period of one year from the date of purchase by the original end- user. The type of service provided is return to an HP or repair- authorized reseller service-center.