HP Vectra VL600 Supplementary Manual page 59

4 Tighten the tray's four screws (two on each side).
5 Slide the drive tray back into the PC until it clicks into place.
6 Attach all data and power connectors. If you are installing a CD-
ROM, CD-RW or DVD drive, connect the audio cable too.
Audio
Connector
(optional)
7 Replace the cover (described in this chapter).
8 Verify the new configuration by checking the HP Summary Screen.
To access the HP Summary Screen, press
appears during startup.
2 How to Install and Replace Components In Your Desktop PC
Upgrading and Installing Mass Storage Devices
Esc
when the Vectra logo
59