Replacing A Power Protection Device - HP Vectra VL600 Supplementary Manual

WARNING
3 How to Install and Replace Components In Your Minitower PC

Replacing a Power Protection Device

Replacing a Power Protection Device
For your safety, never remove the PC's cover without first removing
the power cord from the power outlet and any connection to a
telecommunications network. If a power protection device is fitted to
your PC, you must remove the power cord then wait for a complete
shutdown of your system before removing the cover. Remove the
power protection device cables before any servicing operation. Always
replace the cover before switching the PC on again.
1 Remove the computer's cover and front panel (described in
this chapter).
2 Remove the power alert and passthru cables from the power
protection device, and from the power supply unit and system board
For more information, refer to the Installation Guide that comes
with this device.
114