HP Vectra VL600 Supplementary Manual page 39

NOTE
Recovering Hard Disk
Contents
NOTE
2 Place the CD-ROM in the PC's CD-ROM drive and restart the PC.
3 Select the option you want from the menu that appears on screen.
Some examples are provided below.
If the PC does not boot from the HP Image Creation & Recovery CD-
ROM, you must change the order of devices from which your PC tries to
start up.
To do so, restart your PC and press
. Select
Menu ATAPI CD-ROM Drive
device boot order from the
accessed by pressing
In the unlikely event of a hard disk crash, you can recover your PC's
preloaded operating system and software using the HP Image
Creation & Recovery CD-RO M supplied with your PC. You can
recover, for example:
Windows 95, Windows 98 or Windows NT 4.0 & Service Pack,
•
depending on your model.
Any HP-supplied drivers (for example, video, IDE and LAN).
•
Any HP-designed manageability applications (for example,
•
HP TopTools and HP DiagTools).
Any software that has been installed on the PC after it was
manufactured, and any personal data that has been generated by
applications installed on the PC, are not covered by the recovery
process.
Some drivers may be updated. You can get the latest drivers at:
www.hp.com/go/vectrasupport
when prompted to enter the
F8
in the
Boot Menu
menu of your PC's Setup program,
Boot
during startup.
F2
.
1 Troubleshooting Your PC
HP Image Creation & Recovery CD-ROM
. You can also change the
Boot
39