Setting A User Password; Saving Your Changes And Leaving Setup - HP Brio 81XX Online Manual

Setting a User Password

A User Password can only be set if an Administrator Password has already been set.
Set a User Password to:
•
Provide a power-on password prompt to prevent your PC being started or used in your absence.
•
Start the PC when the keyboard (and mouse) are locked—you press the
the key again to unlock the keyboard.
If you have set both an Administrator Password and a User Password, and you enter the Setup program by using the
User Password, you will be restricted in your ability to change setup items. If you enter the Setup program with an
Administrator Password, you will have no restrictions.
To set a User Password:
1 Start the Setup Program. Refer to
2 Select the Security menu group. Then select the "User Password" submenu.
3 Choose the "Set User Password" setup item. You will be asked to enter your password twice. Be sure to save your
changes before you exit the Setup program.

Saving Your Changes and Leaving Setup

When you have made all your changes, you must save them and exit Setup. To save changes and exit Setup:
1 Press the key twice to enter the Exit menu.
2 Select Save changes and Exit to save your changes and exit Setup.
The PC will automatically restart. If you set a User Password, the PC will display the power-on prompt. Enter the User
Password to use the PC.
"HP Setup Program" on page
key, type the password and press
37.
3 The HP Setup Program
Setting Passwords
40