Installing Accessory Boards; Accessory Board Slots - HP Vectra VL600 Supplementary Manual

CAUTION
Physical Slot 1
Physical Slot 2
Physical Slot 3
Physical Slot 4
Physical Slot 5
Physical Slot 6
Physical Slot 7
NOTE

Installing Accessory Boards

Static electricity can damage electronic components. Turn all
equipment off. Don't let your clothes touch the accessory. To equalize
the static electricity, rest the accessory bag on top of the computer
while you are removing the accessory from the bag. Handle the
accessory as little as possible and with care.

Accessory Board Slots

The PC has se ven accessory board slots.
Accessory Board Connectors
Physical slot 1 (the outermost slot) can be used for a full-length
•
16-bit ISA board.
Physical slot 2 can be used for a full-length 16-bit ISA board.
•
Physical slot 3 can be used for a full-length 32-bit PCI board.
•
Physical slot 4 can be used for a full-length 32-bit PCI board.
•
Physical slot 5 can be used for a full-length 32-bit PCI board.
•
Physical slot 6 can be used for a full-length 32-bit PCI board.
•
Physical slot 7 (the innermost slot) can be used for an AGP board.
•
It is recommended that you install a LAN card in Physical Slot 4 (PCI 3).
3 How to Install and Replace Components In Your Minitower PC
Installing Accessory Boards
ISA2
ISA 1
PCI 4
PCI 3
PCI 2
PCI 1
AGP
99