JETWAY NF731V Series User Manual page 38

HTTP boot option will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 PXE Boot Support. When set as [Disabled], Ipv6 boot
optional will not be created.
Ipv6 HTTP Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 HTTP Boot Support. When set as [Disabled], Ipv6
HTTP boot option will not be created.
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Media Detect Count
Use this item to set number of times presence of media will be checked.
The optional settings range from [1] to [50].
 CSM Configuration
Press [Enter] to make settings for the following sub-items:
Option ROM execution
Network
This item controls the execution of UEFI and Legacy PXE OpROM.
The optional settings are: [Do Not Launch]; [Legacy].
Storage
This option controls the execution of UEFI and Legacy Storage OpROM.
The optional settings are: [Do Not Launch]; [UEFI]; [Legacy].
Other PCI Devices
This item determines OpROM execution policy for devices other than Network,
storage or video.
The optional settings are: [Do Not Launch]; [UEFI]; [Legacy].
 USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
Legacy USB Support
33