JETWAY NF731V Series User Manual page 30

ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
 Wake-up Function Settings
Press [Enter] to make settings for the following sub-items:
Wake-up System with Fixed Time
Use this item to enable or disable system wake on alarm event.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the hour/min/sec specified.
Wake-up Hour
Use this item to select 0-23 for example enter 3 for 3am and 15 for 3pm
Wake-up Minute
Use this item to 0-59
Wake-up Second
Use this item to 0-59
Wake-up System with Dynamic Time
Use this item to enable or disable system wake on alarm event.
System will wake on the current time + Increase minutes.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following items shall appear:
Wake-up Minute Increase
Use this item to 1-60
PS2(S3-S5) / USB(S3-S4)Wake-up
Use this item to PS2(S3/S5)/ USB(S3/S4) Wake-up
The optional settings: [Disabled]; [Enabled].
USB S5 Power
Use this item to enable or disable USB power after power shutdown.
The optional settings: [Disabled]; [Enabled].
* Note: This function is supported when 'ERP Support' is set as [Disabled].
 Super I/O Configuration
25