JETWAY NF731V Series User Manual page 36

Putty Keypad
Use this item to select functionkey and keypad on putty
The optional settings are: [VT100]; [LINUX]; [XTERMR6]; [SCO]; [ESCN];
[VT400].
Redirection After BIOS POST
Use this item to the settings specify if BootLoader is selected then Legacy
console redirection is disabled before booting to Legacy OS. Default value is
always enable which means legaacy console redirection is enabled for legacy
OS.
The optional settings are: [Always Enable]; [BootLoader].
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in 'Console Redirection
Settings':
 Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items.
Out-of-Band Mgmt Port
Use this item to Microsoft Windows emergency management services (EMS)
allows for remote management of a Windows server OS through a serial port
The optional settings are: [COM1]; [COM1(Pci Bu0, Dev0, Func0) (Disabled)].
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next
best choice is VT100+ and then VT100. See above, in console redirection
settings page, for more help with terminal Type/Emulation
The optional settings are: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
Bits per second
31