JETWAY NF731V Series User Manual page 28

Adjacent Cache Line Prefetch
The optional settings are: [Disabled]; [Enabled].
Use this item to turn on/off prefetching of adjacent cache lines.
Intel(R) SpeedStep(tm)
Use this item to Allows more than two frequency ranges to be supported
The optional settings: [Disabled]; [Enabled].
CPU C States
Use this item to enable or disable CPU Power Management. When set as
[Enabled], it allows CPU to go to C states when it's not 100% utilized.
The optional settings: [Disabled]; [Enabled].
Package C State Limit
Use this item to select maximum package C State Limit setting.
CPU Default value. Auto: Initializes to deepest available Package C State Limit.
The optional settings: [C0/C1]; [C2]; [C3]; [C6]; [C7]; [C7S]; [C8]; [C9]; [C10];
[Cpu Default]; [Auto].
 SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following items shall appear:
SATA Mode Selection
This item determines how SATA controller(s) operate.
The default setting is: [AHCI].
mSATA
Software Preserve
Port
The optional settings are: [Enabled]; [Disabled].
SATA
Software Preserve
Port
23