Pixel Format; Stc-Mbs202Poe-Bpf; Binning - Omron STC-MBS202POE-BPF Product Specifications And User's Manual

10.9

Pixel Format

The image format from camera can be set on Pixel Format.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on camera:
Output Bits
8bits
10bits
10bits Packed
12bits
12bits Packed
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
10.10

Binning

Binning is added adjacent pixels into one pixel.
The pixel data inside of red square add or average as one pixel.
Binning X (OFF), Y (OFF)
GenICam Parameter
BinningHorizontal
BinningVertical
(*1) Binning cannot change horizontal only or vertical only. Selection applies for horizontal and vertical.
(*2) Binning and decimation cannot use simultaneously.
(*3) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Binning.

STC-MBS202POE-BPF

Product Specifications and User's Guide
IEnumeration Type Pixel Format
Pixel Format
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
Binning X (ON), Y (ON)
IInteger Type Sets binning on horizontal direction
Selection: 1: Disable Binning, 2: x2 Binning
Default: Disable Binning
IInteger Type Sets binning on vertical direction
Selection: 1: Disable Binning, 2: x2 Binning
Default: Disable Binning
No.19S195-01
42/65