Chunk Control; Action Control - Omron STC-MBS202POE-BPF Product Specifications And User's Manual

10.18

Chunk Control

This function is attached additional image information to image data.
For example, the exposure time and gain information do not include in image data itself. However, Chunk data
transfers these parameters when image was acquiring.
GenICam Parameters
ChunkModeActive
ChunkSelector
ChunkEnable
10.19

Action Control

The multiple cameras control by one action signal.
GenICam Parameters
ActionQueueSize
ActionDeviceKey
ActionSelector
ActionGroupKey
ActionGroupMask
STC-MBS202POE-BPF
Product Specifications and User's Guide
IBoolean Type Chunk control ON / OFF selection
Default: "False" (Off)
IEnumeration Type Transfer Chunk data selection
Selection: "Image", "Offset X", "Offset Y", "Width", "Height", "Pixel Format",
IBoolean Type Enable Chunk data that was selected at "Chunk Selector"
Selection: "True" (Enable Chunk data) and "False" (Disable Chunk data)
IInteger Type Size of scheduled action command queue
IInteger Type Control identifier of camera
IInteger Type Action command application selection
Fixed as "0"
IInteger Type Action command applies camera
* The camera executes action command when group key of action command
and group key of camera is matched.
IInteger Type Select camera to apply action command
Logical AND of Group Mask of camera and Group Mask of action command is 1
for any bit of 32bits, camera executes action command.
"Gain", "Exposure Time", "Black Level", "Line Status All",
"Device Temperature", "Timer Value" and "Counter Value"
No.19S195-01
49/65