Table of Contents
Advertisement
Pixel Format
10.10
The image format from camera can be set on PixelFormat.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on camera:
Output Bits
8bits
10bits
10bits Packed
12bits
12bits Packed
8bits x 3
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
Decimation
10.11
When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
＜STC-MBS881POE＞
Decimation X (OFF), Y (OFF)
GenICam Parameter
DecimationHorizontal
DecimationVertical
(*1) Decimation cannot change horizontal only or vertical only. Selection applies for horizontal and vertical.
(*2) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Decimation.
STC-MBS881POE / STC-MCS881POE
Product Specifications and User's Guide
IEnumeration Type
Pixel Format
Monochrome Camera
STC-MBS881POE
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
N/A
Decimation X (ON), Y (ON)
IInteger Type
Sets decimation on horizontal direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
IInteger Type
Sets decimation on vertical direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
Pixel Format
Color Camera
STC-MCS881POE
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
RGB8
＜STC-MCS881POE＞
Decimation X (OFF), Y (OFF)
No.19S208-00
BayerRG8
BayerRG10
BayerRG10Packed
BayerRG12
BayerRG12Packed
Decimation X (ON), Y (ON)
48/73
Advertisement
Table of Contents
