Pixel Format; Priority Mode; Binning - Omron STC-LBS34U3V-SWIR Product Specifications And User's Manual

9.2

Pixel Format

The image format from camera can be set on Pixel Format.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on camera:
Output Bit
8bits
10bits
10bits Packed
12bits
12bits Packed
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
9.3

Priority Mode

The frame rate prioritized mode or the Image quality prioritized mode is selectable for 8bits image output.
GenICam Parameters
PrioiryMode
9.4

Binning

Binning is summing and averaging beside pixels into one pixel.
The pixel data inside of red square add or average as one pixel.
X(Off), Y(Off)
Binning
GenICamParameters
BinningHorizontal Integer Type
BinningVertical Integer Type
(*) Applies averaging for horizontal direction and summing for vertical direction.
(*) Binning and Decimation function cannot be use simultaneously.
STC-LBS34U3V-SWIR
Product Specifications and User's Guide
IEnumeration Type Sets Pixel Format
PixelFormat
Mono8
Mono10
Mono10p
Mono12
Mono12p
IEnumeration Type Switch Priority mode for 8bits output
0: Image quality prioritized, 1: Frame rate prioritized,
Default: Image quality prioritized
Binning X(Off), Y(On)
Sets Binning on Horizontal direction
1: Disable Binning 2: Binning 2 Pixel
Sets Binning on Vertical direction
1: Disable Binning 2: Binning 2 Pixel
Binning X(On), Y(Off)
No. 22S036-00
Binning X(On), Y(On)
33/54