Table of Contents
Advertisement
9.2
Pixel Format
The image format from camera can be set on the Pixel Format.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on the camera:
Output Bit
8bits
10bits
10bits Packed
12bits
12bits Packed
RGB8 Packed
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
9.3
Binning
Binning OFF: BinningVertical = 1, BinningHorizontal = 1
A full resolution (2,592 x 1,944) images are output. The default frame rate is 14 fps
Binning Vertical 1/2: BinningVertical = 2, BinningHorizontal = 1
The width is full resolution, and approximately 1/2 of the height of the "Normal" image is output (2,592 x 972).
The image becomes the center portion of the "Binning" image. The Binning's frame rate is about 23 fps
*Note: Sensitivity may not increase on Vertical.
STC-SCA503POE / STC-SBA503POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
IEnumeration Type
Pixel Format
Monochrome Camera
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
N/A
Pixel Format
Color Camera
BayerRG8
BayerRG10
BayerRG10Packed
BayerRG12
BayerRG12Paccked
RGB8Packed
2592
No.13S094-05
33/59
Advertisement
Table of Contents
