Table of Contents
Advertisement
10.10
Pixel Format
The image format from camera can be set on Pixel Format.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on camera:
Output Bits
8bits
10bits
10bits Packed
8bits x 3
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
10.11
Binning
Binning is add or average beside pixels into one pixel.
The sensitivity is increased when adding pixel data. The noise is reduced when averaging pixel data.
The pixel data inside of red square add or average as one pixel.
STC-MBE132POE
Binning X (OFF), Y (OFF)
GenICam Parameters
BinningHorizontal
Mode
BinningVertical Mode
BinningHorizontal
BinningVertical
*Note Horizontal Binning and vertical Binning settings need to change together.
STC-MBE132POE / STC-MCE132POE
Product Specifications and User's Guide
IEnumeration Type
Pixel Format
Monochrome Camera
STC-MBE132POE
Mono8
Mono10
Mono10Packed
N/A
Binning X (ON), Y (ON)
IEnumeration
Selects Binning mode for horizontal binning function.
Type
Selection: Sum, Average (Default)
IEnumeration
Selects Binning mode for vertical binning function.
Type
Selection: Sum, Average (Default)
IInteger Type
Sets Binning on Horizontal direction
1: Disable Binning (Default) 2: Binning 2 Pixel
IInteger Type
Sets Binning on Vertical direction
1: Disable Binning (Default) 2: Binning 2 Pixel
Pixel Format
Color Camera
STC-MCE132POE
Mono8
Mono10
Mono10Packed
RGB8
STC-MCE132POE
Binning X (OFF), Y (OFF)
No.19S185-01
BayerRG8
BayerRG10
BayerRG10Packed
Binning X (ON), Y (ON)
45/68
Advertisement
Table of Contents
