Mechanical Specifications; Environmental Specifications - Omron STC-MBS202POE-BPF Product Specifications And User's Manual

5.3

Mechanical Specifications

Model Number
Dimensions
Optical Filter
Optical Center Accuracy
Material
Lens Mount
Interface Connectors
Camera Mounting
Weight
(*1) Excluding the connectors
5.4

Environmental Specifications

Model Number
Operational Minimum
Temperature /
Humidity
Maximum
Storage Temperature / Humidity
Vibration
Shock
Standard Compliancy
RoHS
(*1) Please insure the camera is installed with the appropriate heat dissipation. If camera has a mounted lens and a tripod
with an aluminum plate, this could decrease the camera housing temperature for heat dissipation. When the internal
temperature sensor on the camera shows less than 74 deg. C, the camera housing temperature (top plate) will be less than
64 deg. C.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Upper side of camera
STC-MBS202POE-BPF
Product Specifications and User's Guide
Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Power- I/O connector: HR10A-7R-6PB (Hirose) or equivalent
Six M3 screw holes (Two on top, four on bottom plate)
Environmental Humidity: 0 to 85 %RH (No condensation)
Camera housing temperature (top plate) shall not exceed +64 deg. C (*1)
Environmental Humidity: 0 to 85 %RH (No condensation)
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
ICES (ICES-003 Issue 6: 2007 (updated) (Class A))
Measuring point
STC-MBS202POE-BPF
29 (W) x 29 (H) x 53 (D) mm (*1)
850nm Band Pass Filter
Aluminum Alloy (AC)
C mount
Ethernet connector: RJ45 connector
Approximately 65 g
STC-MBS202POE-BPF
Environmental Temperature: 0 deg. C,
Environmental Temperature: +36 deg. C or
CE (EMS: EN61000-6-2, EMI: EN55011)
FCC (47 CFR FCC Part 15 Subpart B)
RoHS Compliance
No.19S195-01
13/65