Decimation - Omron STC-MBS202POE-BPF Product Specifications And User's Manual

10.11

Decimation

When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
Decimation X (OFF), Y (OFF)
GenICam Parameter
DecimationHorizontal
DecimationVertical
(*1) Decimation cannot change horizontal only or vertical only. Selection applies for horizontal and vertical.
(*2) Binning and decimation cannot use simultaneously.
(*3) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Decimation.
STC-MBS202POE-BPF
Product Specifications and User's Guide
Decimation X (ON), Y (ON)
IInteger Type Sets decimation on horizontal direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
IInteger Type Sets decimation on vertical direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
Decimation X (OFF), Y (OFF)
No.19S195-01
Decimation X (ON), Y (ON)
43/65