Pixel Format; Binning - Omron FS-B4KU7DGES-F Product Specifications And User's Manual

10.7

Pixel Format

The image format from camera can be set on PixelFormat.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on camera:
Output Bits
8bits
10bits
10bits Packed
12bits
12bits Packed
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
10.8

Binning

Binning is added adjacent pixels into one pixel.
The pixel data inside of red square add or average as one pixel.
When selecting "Binning (summing)", sensitivity of image is increasing.
When selecting "Binning (average)", noise is reducing.
Binning X (1), Y (1)
GenICam Parameter
BinningHorizontalMode
BinningHorizontal
BinningVerticalMode
BinningVertical
FS-B4KU7DGES-F / FS-B4KU7DGES-M42 / FS-B2KU7DGES-F / FS-B2KU7DGES-M42 / FS-B2KU7DGES-C
Product Specifications and Use's Guide
IEnumeration Type PixelFormat
PixelFormat
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
Binning X (2), Y (1)
IEnumeration Selects horizontal binning mode.
Type Sum: summing
Average: averaging
IInteger Type Sets binning on horizontal direction
Selection: 1: Disable Binning, 2: x2 Binning
Default: Disable Binning
IEnumeration Selects vertical binning mode.
Type Sum: summing
Average: averaging
IInteger Type Sets binning on vertical direction
Selection: 1: Disable Binning, 2: x2 Binning
Default: Disable Binning
Binning X (1), Y (2)
No.20S048-00
Binning X (2), Y (2)
35/62