Trigger; Trigger Signal Processing Procedure - Omron STC-MBS202POE-BPF Product Specifications And User's Manual

10.12

Trigger

The trigger type (trigger source) is selectable at "Trigger Source" under "Acquisition Control".
The trigger type (trigger source) is listed in below table.
Software
Software Signal 0
Software Signal 1
Action 0
Line 0
Line 2
Logic Block 0

Trigger signal processing procedure

The camera internal process for external hardware trigger signal or software trigger signal input is below:
Line 0
Debounce
Line 2
Debounce
Software Signal 0
Software Signal 1
The trigger signal is selectable by GenICam commands.
Trigger Source: select trigger type
STC-MBS202POE-BPF
Product Specifications and User's Guide
Software trigger generates by "Trigger Software"
Software trigger generates by "Software Signal Control"
Software trigger generates by "Software Signal Control"
Action command trigger
Hardware trigger through "Line 0"
Hardware trigger through "Line 2"
Trigger generates by "Logic Block Control"
Please refers "Trigger signal processing procedure" for more details
Line 0
Line 2
Software
Action 0
Logic Block 0
" AND "
or
" OR "
Trigger Delay
Trigger
Source
No.19S195-01
Camera
Timing
Generator
Sensor
44/65