Serial Port - HP Compaq t5725 User Manual

Serial Port

Factory default: Unspecified
This option specifies the name of the serial port device which will be used for host
communications when the Use Serial Port option is selected.
Click the pointer on the line then enter the name of the device, for example:
If an invalid device is specified, or the device cannot be accessed, communication will
be defaulted back to the operating system shell.
Transmit Rate
Factory default: 19200
The numeric value of this option specifies the maximum effective baud rate that
TeemTalk transmits at. This is used to artificially reduce data rates on higher baud rate
interfaces.
Use RS232 Port Connection
Factory default: Unselected
The setting of this option determines whether TeemTalk will communicate with the
operating system shell, or the host via a serial port.
When unselected, TeemTalk will communicate with the operating system shell. The
Parity setting is used to determine the number of data bits. The other options in this
dialog box do not apply.
When selected, host communications will be made via the serial port device specified
by the Serial Port option using the communications format specified in this dialog
box.
Sun: /dev/ttya
HP: /dev/tty0
VAX: TTA0:
Setup Menus
6-33