HP Compaq t5725 User Manual page 26

Getting Started
1
Button 1: This button displays the active session (always 1), the current page number
(always 1), and the line,column location of the text cursor.
Clicking the button will activate the Hold Screen function, stopping data
from scrolling in the window. To resume scrolling, click the button again.
Button 2: This button toggles the visibility of the soft buttons displayed at the
bottom of the window on and off.
Button 3: This button indicates whether Overstrike Mode or Insert Mode is
currently selected.
In Overstrike Mode (default), new characters will replace already existing
characters at the cursor position. When Insert Mode is selected, new
characters will be inserted at the cursor position without deleting existing
characters, which will move to the right.
Button 4: Indicates the current DEC VT alpha terminal emulation (VT52, VT100,
VT400 7-Bit or 8-Bit). Clicking the button enables you to select a
different DEC VT alpha terminal emulation mode without having to
display the Emulation Settings dialog box, which will be updated
automatically with the new setting.
Button 5: Indicates whether you are Online to the host or in Local mode. Clicking
the button will toggle between the two modes.
Button 6: Indicates the status of the printer as follows:
None signifies that the printer is not turned on or not connected.
Not Ready signifies that the printer is not ready to receive data for
printing.
Ready signifies that the printer is ready to receive data for printing.
Auto signifies that the emulation is in Auto Print mode in which the
current cursor line is sent to the printer when a command for the cursor to
move to the next line is issued.
Controller signifies that the emulation is in Printer Controller mode in
which the host has direct control over the printer. Print screen commands
issued from the keyboard or mouse will be ignored.
This button does not perform any function when clicked.
2-12
2 3 4 5 6