0600H - 06Ffh: Serial Port Error Codes - HP Brio BA200 User Manual

Appendix A The Error Codes
0600h – 06FFh: Serial Port Error Codes
0600h – 06FFh: Serial Port Error Codes
Code
0601h Data written to port xxxxh was yyyyh.
Data read back from the port was zzzzh.
0602h Interrupt identification register test failed. Serial port controller error.
0603h Data written to port XXXXh was yyyyh.
Data read back from the port was zzzzh.
0604h Line status register test failed at port
XXXXh.
0605h Interrupt activation test failed at port
XXXXh.
0606h Data transfer test failed at port XXXXh.
0607h Loop back test failed at port XXXXh.
0608h FIFO register test failed at port XXXXh.
56
Explanation
English
Details/Parts to Check
Serial port or serial port controller error.
Check that external loopback (test) connector is
correctly installed.
If error persists install new system board.
Install new system board.
Serial port or serial port controller error.
Check that external loopback (test) connector is
correctly installed.
If error persists install new system board.
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.
Serial port or serial port controller error.
Check that external loopback (test) connector is
correctly installed.
If error persists install new system board.
Serial port or serial port controller error.
Check that external loopback (test) connector is
correctly installed.
If error persists install new system board.
Serial port controller error.
Install new system board.