Serial Port Policy; Serial Port Policy States - HP StorageWorks MSA 2/8 - SAN Switch User Manual

3. To save or activate the new policy, enter the secpolicysave or the
primaryfcs:admin> secPolicyCreate "MS_POLICY", "12:24:45:10:0a:67:00:40"
MS_POLICY has been created.
primaryfcs:admin>

Serial Port Policy

You can create the Serial Port policy to restrict serial port access to switches that
are physically secure. The policy is named SERIAL_POLICY and contains a list
of switch WWNs, Domain IDs, or switch names for which serial port access is
enabled.
The Serial Port policy is checked before the account login is allowed. If the Serial
Port policy exists and the switch is not included in the policy, the session is
terminated.
The possible Serial Port policy states are shown in
Table 9: Serial Port Policy States
No policy
Policy with no entries
Policy with entries
Secure Fabric OS Version 1.0 User Guide
secpolicyactivate command.
If neither of these commands are entered, the changes are lost when you log
out. For more information about these commands, see
Secure Fabric OS Policies" on page 77 and
Fabric OS Policies" on page 77.
Example, creating an MS_POLICY that allows access through a device that
has a WWN of 12:24:45:10:0a:67:00:40:
Policy State
All serial ports of the switches in the fabric are enabled.
All serial ports of the switches in the fabric are disabled.
Only specified switches can be accessed through the serial
ports.
Creating Secure Fabric OS Policies
"Saving Changes to
"Activating Changes to Secure
Table 9.
Characteristics
67