HP Compaq t5725 User Manual page 115

The key execute character is specified as the control key character equivalent. For
example, the default value ^P represents the keys Ctrl + P, which would generate the
ASCII control character DLE when pressed.
Program Key With
These options enable you to program most keys with up to four definitions (macros)
each, and the soft buttons with one definition each. Keys that cannot be redefined
include Shift, Caps Lock and Print Screen. The programmed contents of a key or
key combination can be transmitted to the host when pressed by selecting the Key
Expansion Enabled option in this dialog box.
To program a key or soft button, click the pointer in the Program Key text box then
press the key or key combination or click the soft button that is to be programmed. The
key combination can be any of the following:
Pressing a key or soft button will cause the key legend or a reference number that
uniquely identifies the key or soft button used to be displayed.
Press Tab or click the pointer in the with text box and enter the new definition. This
can include specific functions associated with a particular terminal emulation as listed
in the Predefined Virtual Key Names list box. The Virtual Key Names appendix
provides a complete list of virtual key names and their associated functions. Clicking a
key name in this list box will cause it to appear on the key definition line. The function
associated with the key name will be attributed to the key or soft button being defined.
You can also enter control characters, or specify that a script file is to be run, as
described in the following sections.
Note: An escape sequence will be sent across a network as a single
packet.
If you are defining a soft button, you can give it a label up to ten characters long which
is displayed on the soft button in the window by entering it in the Soft Button Label
text box.
When the definition is complete, decide if you wish the key or soft button contents to
be saved so that it will be asserted each time TeemTalk is reset or loaded, then click the
Program Volatile or Program NonVolatile button.
Clicking the Program Volatile button will cause TeemTalk to only remember the
definition until it is reset or exited. Clicking the Program NonVolatile button will
Key
Ctrl + Key
Shift + Key
Ctrl + Shift + Key
Alt + Key
Alt + Ctrl + Key
Alt + Shift + Key
Alt + Ctrl + Shift + Key
Setup Menus
6-69