The Status Line; Getting Started; Selecting The Terminal Emulation - HP Compaq t5725 User Manual

Getting Started

2
Getting Started
This chapter describes how to configure TeemTalk for compatibility
with your hardware and the application.

Selecting The Terminal Emulation

When you load TeemTalk for the first time, the DEC VT400 (7-bit) emulation will be
running by default. The current emulation can be changed in one of two ways, either
from the status line or by using a setup dialog box. When an indicator status line with
six buttons is displayed at the bottom of the window, you can change the current DEC
VT terminal emulation to any other DEC VT terminal emulation (VT52, VT100,
VT400 7-Bit or VT400 8-Bit) by clicking the button indicating the current emulation.
All the terminal emulations supported by TeemTalk can be accessed from the Emula-
tion Settings dialog box. This is displayed by selecting Settings in the menu bar then
Emulation... The emulations available are listed in the Alpha Emulation and
Graphics Emulation boxes. To change the current emulation mode, click the pointer on
the name of the emulation required then click Ok. The new setting may be saved so
that TeemTalk will automatically run it when loaded or reset by selecting the Save
Settings option in the File menu.
2-1