Power Management - JETWAY 693AS User Manual

3-8-1 Power Management

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Power Management
HDD Power Down
Doze Mode
Suspend Mode
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Power Management
This category allows you to select the type (or degree) of power saving which is directly
related to the following modes:
User Define(default) Allows you to set each mode individually. When not disabled, each
Min Saving
Max Saving
HDD Power Down
When enabled and after setting time of system inactivity, the hard disk drive will be powered
down while all the other devices remain active.
The settings are: 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Min and Disabled.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be
shut off.
The settings are: l/2/4/8/12/20/30/40 Min, 1 Hour, and Disabled.
Power Management
User Define
Disabled
Disabled
Disabled
F6:Optimized Defaults F7:Standard Defaults
of the ranges is from 1 min. to 1hr. except for HDD Power Down
that ranges from 1 min. to 15 min. and disable.
Minimum power management. Doze Mode 1H, Suspend Mode=1 hr.,
Power Down=15 min.
Maximum power management. Doze Mode 1H, Suspend Mode=1
min., Power Down=1 min.
37
Item Help
Menu Level >>
F1:General Help