Power Management Setup - JETWAY 754GT7-SLI-G User Manual

(3BC/IRQ7)/
(278/IRQ5)/
(378/IRQ7)
Parallel Port Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
ECP+EPP :Extended Capability Port and Enhanced Parallel Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To
operate the onboard parallel port in the EPP modes simultaneously, choose "EPP." By
choosing "ECP", the onboard parallel port will operate in ECP mode only. Choosing
"ECP+EPP" will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously. The ECP mode has to use the DMA channel, so choose the onboard parallel
port with the ECP feature. After selecting it, the following message will appear: "ECP Mode
Use DMA" at this time, the user can choose between DMA channels 3 to 1. The onboard
parallel port is EPP Spec. compliant, so after the user chooses the onboard parallel port with
the EPP function, the following message will be displayed on the screen: "EPP Mode Select."
At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
PS2 KB/MS Wakeup By(S3/S4/S5)
ACPI Function
ACPI Suspend Type
Power Management
Video off Method
HDD Power Down
Power Button Function
AMD K8 Cool'n'Quiet Control
AC Loss Auto Restart
Wake Up on PCI PME
Wake-Up on Ring
Power-On by Alarm
Day Of Month Alarm
Time(hh:mm:ss) Alarm
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS Support (default) Initial display power management signaling.
Line Printer port 0
Line Printer port 2
Line Printer port 1
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
F6:Optimized Defaults
Disabled
Enabled
S1(POS)
User Define
DPMS support
Disabled
Instant-Off
Auto
Always-Off
Disabled
Disabled
Disabled
0
0:0:0
F7:Standard Defaults
33
Item Help
Menu Level >
F1:General Help