Agp Function Settings; Integrated Peripherals - JETWAY 693AS User Manual

3-6-2 AGP Function Settings

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
AGP Aperture Size
AGP Rate Mode
AGP Master 1 WS Write
AGP Master 1 WS Read
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Note: Change these settings only if you are familiar with the chipset.

3-7 Integrated Peripherals

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
> OnChip IDE Function
> OnChip SIO Function
> OnChip Device Function
Init Display First
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
OnChip IDE Function
Please refer to section 3-7-1
OnChip SIO Function
Please refer to section 3-7-2
OnChip Device Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings
are: PCI Slot, AGP Slot.
AGP Function Settings
64M
Auto
Enabled
Enabled
F6:Optimized Defaults
Integrated Peripherals
Press Enter
Press Enter
Press Enter
PCI Slot
F6:Optimized Defaults
31
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults