JETWAY 693AS User Manual page 31

Pci/agp mainboard for socket 370
Table of Contents

Advertisement

Off
Keypad is arrow keys.
Gate A20 Option
Normal
The A20 signal is controlled by keyboard controller or chipset hardware.
Fast (default) The A20 signal is controlled by port 92 or chipset specific method.
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected. The settings are: Enabled/Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key down. The
settings are: 6, 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before is begins to repeat the keystroke. The
settings are 250, 500, 750, and 1000.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default) The system will boot, but access to Setup will be denied if the correct
OS Select For DRAM > 64MB
®
Allows OS2
to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.
Set to OS/2 if using more than 64MB and running OS/2
Report No FDD For Win 95
Whether report no FDD for Win 95 or not. The settings are: Yes, No.
3-6 Advanced Chipset Features
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
password is not entered prompt.
®
.
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-693as

Table of Contents