JETWAY 694TCS User Manual
  1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. 694TCS
  6. User manual

JETWAY 694TCS User Manual

M/b for socket 370 pentium iii processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M/B For Socket 370 Pentium
Trademark:
∗
Pentium is registered trademark and Celeron is a trademark of Intel corporation,
the other names and brands are the property of their respective owners.
∗
Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
694TCS
USER'S MANUAL
NO. G03-694TCS1A
Release date: July 2001
III Processor

Advertisement

Table of Contents
loading

Related Manuals for JETWAY 694TCS

Summary of Contents for JETWAY 694TCS

  • Page 1 694TCS USER'S MANUAL  M/B For Socket 370 Pentium III Processor NO. G03-694TCS1A Release date: July 2001 Trademark: ∗ Pentium is registered trademark and Celeron is a trademark of Intel corporation, the other names and brands are the property of their respective owners.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE ................1 MANUAL REVISION INFORMATION ..........2 COOLING SOLUTIONS ..............2 CHAPTER 1 INTRODUCTION OF 694TCS MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD............... 3 1-2 SPECIFICATION ..................4 1-3 PERFORMANCE LIST ................5 1-4 LAYOUT & JUMPER SETTING ..............6 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS .............
  • Page 3 3-8 POWER MANAGEMENT SETUP.............. 35 3-8-1 POWER MANAGEMENT ............... 36 3-8-2 WAKE UP EVENTS ................. 37 3-8-2.1 IRQS ACTIVITY ................3-9 PNP/PCI CONFIGURATION SETUP............38 3-10 PC HEALTH STATUS................. 39 3-11 MISCELLANEOUS CONTROL ............... 40 3-12 LOAD STANDARD/OPTIMIZED DEFAULTS ........41 3-13 SET SUPERVISOR/USER PASSWORD ...........

  • Page 4: User's Notice

    MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 694TCS MOTHER- BOARD AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE.

  • Page 5: Manual Revision Information

    694TCS Motherboard Cable for IDE/Floppy CD for motherboard utilities Cable for USB Port 3/4 (Option) □ 694TCS User’s Manual  Intel Processor Family Thermal Solutions As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly crucial when building computer systems.

  • Page 6: Chapter 1 Introduction Of 694Tcs Motherboard

    Chapter 1 Introduction of 694TCS Motherboard 1-1 Feature of motherboard The 694TCS motherboard is design for use Intel PentiumIII /Celeron/ Tualatin FC- PGA CPU, which utilize the Socket 370 design and the memory size expandable to 1.0GB. This motherboard use the newest VIA Apollo Pro VT82C694T chipset, whose 133MHz front side bus &...

  • Page 7: Specification

    Spec Description ∗ Micro ATX form factor 4 layers PCB size: 24.4x19.0cm Design ∗ VIA Apollo Pro VT82C694T/82C686B Chipset for 694TCS Chipset ∗ Support Intel Pentium III /Celeron /Tualatin FC-PGA CPU Socket 370 ∗ Support Front Side Bus 66Mhz/100Mhz/133Mhz CPU ∗...

  • Page 8: Performance List

    VGA Expansion Card: Geforce 256 (1024x768 Hi-color) Driver V3.68 IBM DTLA-305040 (ATA100) Hard Disk Driver: BIOS: Award Optimal default Win 98SE Performance Test Report 694TCS 3D Mark 99 5926 3D Mark 2000 4207 3D Winbench 99 V1.2 3D Winbench 2000 82.2...
  • Page 9 PS/2 MOUSE PRINT GAME/MIDI PORT PS/2 KEYBOARD COM1 COM2 LINE-OUT LINE-IN C O M 2 C O M 1 G AME PRINT MO USE AC 97 BIO S LINE IN LINE O UT USB1 C O DEC C D_IN2 AUDIO C D_IN1 ATX _ PO WE R ATX PO WE R C O NN.
  • Page 10 Jumper Name Description Page JK1, JK2 CPU Bus Frequency Selection 3-pin Block p. 8 BSEL0, BSEL1 2-pin Block CPU Ratio Selector 2x4-pin Block p. 8 JBAT CMOS RAM Clear 3-pin Block p. 9 Connectors Connector Name Description Page ATX _ POWER ATX Power Connector 20-pin Block p.15...

  • Page 11: Chapter 2 Hardware Installation

    Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard setting 2. Install CPU 3. Install Memory 4. Install Expansion cards 5. Connect Ribbon cables, Panel wires, and power supply 6.
  • Page 12 CPU Ratio Selector Table for the Pentium III and Celeron Socket 370 CPU Celeron Pentium III Pentium III Speed Ratio Speed Ratio Speed Ratio 366/66 66MHz 5.5x 500E/100 100MHz 5.0x 733/133 133MHz 5.5x 400/66 66MHz 6.0x 533EB/133 133MHz 4.0x 750/100 100MHz 7.5x 466/66...

  • Page 13: Glossary

    2-3 Install CPU 2-3-1 Glossary Chipset (or core logic) - two or more integrated circuits which control the interfaces between the system processor, RAM, I/O devises, and adapter cards. Processor slot/socket - the slot or socket used to mount the system processor on the motherboard.

  • Page 14: Over Clock Running

    This motherboard Provides a ZIF Socket 370. The CPU that comes with the motherboard should have a cooling FAN attached to prevent overheating. If this is not the case, then purchase a correct cooling FAN before you turn on your system. WARNING! Be sure that there is sufficient air circulation across the processor’s heatsink and CPU cooling FAN is working correctly, otherwise it may cause the processor and motherboard overheat and damage, you...

  • Page 15: Install Memory

    CyrixIII Clock Ratio Default Item Help Auto Detect DIMM/PCI Clock Enabled Spread Spectrum Disabled ** Current Host Clock is 66Mhz ** Menu Level > Host Clock at Next Boot is 66Mhz ** Current DRAM Clock is 66Mhz ** CyrixIII CPU Ratio DRAM Clock at Next Boot is 66Mhz (HOST CLK) Adjustment ↑↓→←...

  • Page 16: Expansion Card

    DIMM1 (BANK0+ BANK1) DIMM2 (BANK2+ BANK3) Figure 2-4 NOTE! When you install DIMM module fully into the DIMM socket the eject tab should be locked into the DIMM module very firmly and fit into its indention on both sides. WARNING! For the SDRAM CLOCK is set at 133MHz, use only PC133-compliant DIMMs.

  • Page 17: Interrupt Request Table For This Motherboard

    Some expansion cards need an IRQ to operate. Generally, an IRQ must exclusively assign to one use. In a standard design, there are 16 IRQs available but most of them are already in use. Standard Interrupt Assignments Priority Standard function System Timer Keyboard Controller Programmable Interrupt...

  • Page 18: Connectors, Headers

    2-6 Connectors, Headers 2-6-1 Connectors Power Connector (20-pin block) : ATX _ POWER ATX Power Supply connector. This is a new defined 20-pin connector that usually comes with ATX case. The ATX Power Supply allows to use soft power on momentary switch that connect from the front panel switch to 2-pins Power On jumper pole on the motherboard.
  • Page 19 USB PORT 1 USB PORT 2 Parallel Port Connector (25-pin female) : PRINT Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS SETUP” section for more detail information.
  • Page 20 COMA is the 9-pin D-Subminiature mail connector. The On-board serial port can be disabled through BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS SETUP” section for more detail information. COM1 COM2 (7) Floppy drive Connector (34-pin block): FDD This connector supports the provided floppy drive ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to the floppy drives.

  • Page 21: Headers

    Pin 1 Secondary IDE Connector • Two hard disks can be connected to each connector. The first HDD is referred to as the “Master” and the second HDD is referred to as the “Slave”. • For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM drive on the same IDE channel as a hard disk.
  • Page 22 Power LED: PWR LED The Power LED is light on while the system power is on. Connect the Power LED from the system case to this pin. Power switch: PWR _ BTN This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system.
  • Page 23 (10) FAN Speed Headers (3-pin) : CPU-FAN, SYS-FAN, FAN3 These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan manufacturer, the wire and plug may be different. The red wire should be positive, while the black should be ground. Connect the fan’s plug to the board taking into consideration the polarity of connector.

  • Page 24: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 25: Chapter 3 Introducing Bios

    Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 26: The Main Menu

    Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu/Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.

  • Page 27: Standard Cmos Features

    Use this menu to change the values in the chipset registers and optimize your system’s performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals. Power Management Setup Use this menu to specify your settings for power management. PnP/PCI configurations This entry appears if your system supports PnP/PCI.
  • Page 28 The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. CMOS Setup Utility –...

  • Page 29: Advanced Bios Features

    The settings are Auto Normal, Large, and LBA. Access Mode Cylinder number of cylinders Head number of heads Precomp write precomp Landing Zone landing zone number of sectors Sector 3-5 Advanced BIOS Features CMOS Setup Utility – Copyright(C) 1984-2000 Award Software Advanced BIOS Features Anti-Virus Protection Disabled...
  • Page 30 The default value is Enabled. Enabled (default) Enable cache Disabled Disable cache Note: The internal cache is built in the processor. CPU L2 Cache Choose Enabled or Disabled. This option enables the Level 2 cache memory. CPU L2 Cache ECC Checking Choose Enabled or Disabled.

  • Page 31: Advanced Chipset Features

    Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30. Typematic Delay (Msec) Sets the delay time after the key is held down before is begins to repeat the keystroke. The settings are 250, 500, 750, and 1000.

  • Page 32: Dram Timing Settings

    Please refer to section 3-6-1 AGP Function Settings Please refer to section 3-6-2 Memory Hole You can reserve this area of system memory for ISA adapter ROM. When this area is reserved, it cannot be cached. The user information of peripherals that need to use this area of system memory usually discusses their memory requirements.

  • Page 33: Agp Function Settings

    When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The settings are: 2 and 3. RAS Precharge Time If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain date.

  • Page 34: Integrated Peripherals

    3-7 Integrated Peripherals CMOS Setup Utility – Copyright(C) 1984-2000 Award Software Integrated Peripherals > OnChip IDE Function Press Enter Item Help > OnChip SIO Function Press Enter > OnChip Device Function Press Enter Init Display First PCI Slot Menu Level > ↑↓→←...

  • Page 35: Onchip Sio Function

    OnChip IDE Channal0/Channel1 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. The settings are: Enabled and Disabled. Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports.

  • Page 36: Onchip Device Function

    Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. The settings are: Enabled and Disabled. Onboard Serial Port 1/Port 2 Select an address and corresponding interrupt for the first and the second serial ports.

  • Page 37: 3-7-3.1 Onchip Sound Function

    > OnChip Sound Function Press Enter Item Help USB Host Controller Enabled USB Keyboard Support Disabled USB Mouse Support Disabled Menu Level >> AC97 Modem Device Auto ↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults F7:Standard Defaults OnChip Sound Function Please refer to section 3-7-3.1...

  • Page 38: Power Management Setup

    When set to “Auto”, BIOS will enable/disable the On-chip AC97 Audio depend on the presence/absence of external PCI audio. Game Port (200-207H) This item allows you enabled or disabled on board Game Port. 3-8 Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use.

  • Page 39: Power Management

    Soft-off by PWRBTN Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The settings are: Delay 4 Sec, Instant-Off. Wake-Up Events Please refer to section 3-8-2 3-8-1 Power Management CMOS Setup Utility – Copyright(C) 1984-2000 Award Software Power Management Power Management User Define...

  • Page 40: 3-8-2.1 Irqs Activity

    CMOS Setup Utility – Copyright(C) 1984-2000 Award Software Wake Up Events Item Help LPT & COM LPT/COM HDD & FDD DMA/Master Menu Level >> Wake-Up On Ring/LAN(WOL) Disabled Wake-Up On PCI PME Disabled Wake-Up RTC Alarm Disabled Date of Month Alarm Time (hh:mm:ss) Alarm 0 : 0 : 0 >...

  • Page 41: Pnp/Pci Configuration Setup

    CMOS Setup Utility – Copyright(C) 1984-2000 Award Software IRQs Activity Primary INTR Item Help IRQ3 (COM 2) Enabled IRQ4 (COM 1) Enabled IRQ5 (LPT 2) Enabled Menu Level >>> IRQ6 (Floppy Disk) Enabled IRQ7 (LPT 1) Enabled IRQ8 (RTC Alarm) Disabled IRQ9 (IRQ2 Redir)

  • Page 42: Pc Health Status

    Data (ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system can not boot. The settings are: Enabled and Disabled. Resource Controlled By The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug and Play compatible devices.

  • Page 43: Miscellaneous Control

    Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/ Vdd/3.3V/+5V/+12V (V) This will show the CPU/FAN/System voltage chart and FAN Speed. 3-11 Miscellaneous Control This section is for setting CPU Miscellaneous Control. CMOS Setup Utility – Copyright(C) 1984-2000 Award Software Miscellaneous Control CyrixIII Clock Ratio Default Item Help...

  • Page 44: Set Supervisor/User Password

    When you press <Enter> on this item, you get confirmation dialog box with a message similar Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations. Load Optimized Defaults When you press <Enter> on this item, you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N)? N Pressing <Y>...

  • Page 45: Magic Install Supports Windows 95/98/98Se/Nt4.0/2000

    Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.
  • Page 46 AGP VGA CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR VGA DRIVER AND INTERFACE DIRECTLY TO HARDWARE, PROVIDING FAST GRAPHIC ACCESS IRQ ROUTING : VIA PCI IRQ MINIPORT DRIVER IS TO BE INSTALLED UNDER WIN98 ONLY, IT WILL FIX PCI IRQ ROUTING SEQUENCE INF : VIA REGISTRY DRIVER IS TO BE INSTALLED UNDER WINDOWS THE DRIVER WILL ENABLE VIA POWER MANAGERMENT CONTROLLER...
  • Page 47 5. Click NEXT to Install ATAPI Vender 6. Click NEXT to choose enabled DMA Mode Support Driver 7. Click NEXT to Install VIA AGP VXD Driver 8. Click NEXT to Install VIA IRQ Routing Mini port Driver 9. Click Finish to restart computer...

  • Page 48: Pc-Health Install Via Hardware Monitor Driver

    4-2 PC-HEALTH Install VIA Hardware Monitor Driver 1. Click PC-HEALTH when Magic Install 2. Click NEXT when VIA Hardware Monitor MENU appears Wizard appears 3. Click Next to install Driver in C:\VIAHM 4. Click Next to use default Program Folders name 4-2-1 How To Use VIA Hardware Monitor Application Software 1.

  • Page 49: Sound Via Ac97 Audio Codec Installing Driver

    4-3 Sound VIA AC97 Audio Codec Installing Driver 1. Click SOUND when Magic Install MENU 2. Click Next when VIA Audio Driver Wizard appears appears 3. Click Next to Install VIA Audio Driver 4. After Copy files please click finish to finish Installing 5.

  • Page 50: Pc-Cillin Install Pc-Cillin 2000 Anti-Virus Program

    4-4 PC-CILLIN Install PC-CILLIN 2000 Anti-virus program 1. Click PC-CILLIN when MAGIC 2. Click NEXT when PC-CILIN 2000 INSTALL MENU Appears SETUP APPEARS. Then click YES when the announcement of copywrite appears. Software is starting to detect HD for virus 3.
  • Page 51 7. If you want to make a rescue disc, insert a 8. Setup Complete and click Finish 1.44 MB disc 9. Enter Your name and E-mail address 10. After install PC-cillin 2000 complete we Register PC-cillin 2000 or Click Cancel recommend select update item to download Register Later newest virus code and setting Auto refresh...

  • Page 52: How To Disable On-Board Sound

    You may copy from DRIVER CD X:\FLASH\AWDFLASH.EXE or download from our web site. STEP 3. Copy latest BIOS for 694TCS from our web site to your boot disc. STEP 4. Insert your boot disc into A:, start the computer, type “Awdflash A:\694TCSxxx.BIN /SN /PY /CC /R”...

Table of Contents