Power Management Setup - JETWAY 845GVFC User Manual

ECP : Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To operate
the onboard parallel port in the EPP modes simultaneously, choose "EPP." By choosing
"ECP", the onboard parallel port will operate in ECP mode only. Choosing "ECP+EPP" will
allow the onboard parallel port to support both the ECP and EPP modes simultaneously. The
ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP
feature. After selecting it, the following message will appear: "ECP Mode Use DMA" at this
time, the user can choose between DMA channels 3 to 1. The onboard parallel port is EPP
Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the
following message will be displayed on the screen: "EPP Mode Select." At this time either
EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
ACPI Function
ACPI Suspend Type
Power Management
Video off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Resume by Alarm
X Date (of Month)
X Time (hh:mm:ss)
CPU Thermal Management Timer
> PM Timer Reload Events
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
ACPI Suspend Type
This item allows you to select ACPI Suspend Type.
The setting are: S1(POS), S3(STR)
Video Off in Suspend
This determines the manner in which the monitor is blanked. The choice are Yes → Video will off ,
and No→ Video always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Power Management Setup
Enabled
S1(POS)
User Define
V/H SYNC+Blank
Yes
Stop Grant
3
Disabled
Disabled
Instant-off
Disabled
Disabled
Disabled
0
0 : 0 :0
32 Min
Press Enter
F6:Optimized Defaults
Initial display power management signaling.
28
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults