Power Management Setup - JETWAY For Socket 370 User Manual

Parallel Port Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To
operate the onboard parallel port in the EPP modes simultaneously, choose "EPP." By
choosing "ECP", the onboard parallel port will operate in ECP mode only. Choosing
"ECP+EPP" will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously. The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following message will appear:
"ECP Mode Use DMA" at this time, the user can choose between DMA channels 3 to 1.
The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard
parallel port with the EPP function, the following message will be displayed on the
screen: "EPP Mode Select." At this time either EPP 1.7 spec. or EPP 1.9 spec. can be
chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
ACPI Function
Video Off Option
Video Off Method
Switch Function
MODEM Use IRQ
Hot key Function As
HDD Off After
Power Button Function
> PM Wake Up Events
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
Power Management Setup
Enabled
Susp, Stby -> off
V/H SYNC+Blank
Break/Wake
3
Disabled
Disabled
Instant-Off
Press Enter
F6:Optimized Defaults F7:Standard Defaults
36
Item Help
Menu Level >
F1:General Help