Error Message - Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Error Message

Execute printhead cleaning.
Cannot adjust printhead.
Maximum jobs stored.
Mail box full. Now printing
without saving data.
Cause
The Printhead nozzles are
clogged.
The Printhead nozzles are
clogged.
The Printhead cannot be aligned;
highly transparent film is loaded.
100 jobs are stored in the personal
box.
No more space is available on the
printer's hard disk, so jobs are now
printed without saving them. (Print
jobs can no longer be saved on the
hard disk.)
Corrective Action
Follow these steps to clean the Printhead .
1. Stop printing by pressing ▲ or ▼ to select Stop
Printing .
2. Clean the Printhead .
(→ , If Printing is Faint)
If this message is still displayed, replace the
Printhead .
(→ , Replacing the Printhead)
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing. However, note that this
error may affect the printing quality.
If OK is shown on the Display Screen , clean the
Printhead .
1. Press the OK button on the Control Panel to stop
printing.
2. Clean the Printhead .
(→ , If Printing is Faint)
If this message is still displayed, replace the
Printhead .
(→ , Replacing the Printhead)
Execute Head Posi. Adj. again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(→"Checking for Nozzle Clogging," User Manual)
3. Clean the Printhead if the nozzles are clogged.
(→ , If Printing is Faint)
4. Execute Head Posi. Adj. again.
(→ , If Vertical Lines are Warped or Colors are
Misaligned)
Press the OK button to clear the error.
We recommend using a type of paper that you often
use, other than film, for Printhead adjustment.
(→ , If Vertical Lines are Warped or Colors are
Misaligned)
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User Manual)
After printing, this message is cleared.
Delete unneeded jobs stored in personal boxes (box
numbers in the range 01–29).
(→"Deleting Saved Jobs," User Manual)
41
Error Messages