Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual page 47

Large format printer
Hide thumbs Also See for imagePROGRAF iPF8300 Basic Guide No.2:
Table of Contents

Advertisement

Error Message
MediaType Mismatch
Cause
When Detect Mismatch in the
Control Panel menu is set to
Pause , the type of paper loaded
does not match the type specified
in the printer driver.
You tried to print a test pattern
for printer adjustment on several
sheets, but sheets of different
types of paper were used.
When Detect Mismatch in the
Control Panel menu is set to
Warning , the type of paper loaded
does not match the type specified
in the printer driver.
Corrective Action
Follow these steps to ensure the paper type matches
on the printer and in the printer driver.
1.
Press ▲ or ▼ to select Change Paper , and then
press the OK button.
2.
Replace the loaded paper with paper of the type
and size you have specified in the printer driver.
The printer will resume printing.
(→"Loading and Printing on Rolls," User Manual)
(→"Loading and Printing on Sheets," User Manual)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver.
1.
Press ▲ or ▼ to select Stop Printing , and then
press the OK button to stop printing.
2.
Replace the loaded paper with paper of the type
and size you have specified in the printer driver.
The printer will resume printing.
(→"Loading and Printing on Rolls," User Manual)
(→"Loading and Printing on Sheets," User Manual)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver.
1.
Press ▲ or ▼ to select Stop Printing , and then
press the OK button to stop printing.
2.
Either change the type of paper specified in the
printer driver settings or replace the loaded paper
and change the paper type setting on the printer.
(→"Loading and Printing on Rolls," User Manual)
(→"Loading and Printing on Sheets," User Manual)
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing.
However, note that this error may cause paper jams
and affect the printing quality.
When printing a test pattern for adjustment, use
sheets of the same type of paper, in the required
quantity. Replace the paper as follows and perform
adjustment again.
1.
Lift the Release Lever and stop printing.
2.
Replace the paper.
(→"Loading and Printing on Sheets," User Manual)
3.
Execute adjustment again from the control panel
menu.
You can continue to print, but note that this error may
cause problems in the printing results.
47
Error Messages

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents