Loading Sheets In The Printer - Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Error Message
Paper loaded askew.
Borderless printng not possible.
Paper stretched or shrank.
Cause
Paper loaded crooked was
detected when the paper was
advanced.
The loaded roll has expanded or
contracted due to environmental
conditions, making it wider or
narrower than the supported width
for borderless printing.
45
Corrective Action
Follow these steps to reload the roll.
1. Lift the Release Lever .
2. Adjust the right edge of the roll to make it parallel to
the orange Paper Alignment Line .
3. Lower the Release Lever .
(→ , Loading Rolls in the Printer)
If this error recurs after you reload the roll, remove
the Roll Holder from the printer, push the roll firmly in
until it touches the Roll Holder flange, and reload the
Roll Holder in the printer.
(→ , Attaching the Roll Holder to Rolls)
Follow these steps to reload the sheet.
1. Lift the Release Lever .
2. Pull out the sheet.
3. Lower the Release Lever .
4. Adjust the right edge of the sheet to make it parallel
to the right Paper Alignment Line and the trailing
edge of the sheet to make it parallel to the paper
alignment line under the Paper Retainer .
(→

, Loading Sheets in the Printer)

Press the OK button to stop printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide .
(→"Types of Paper," User Manual)
Error Messages