The Printer Stops During A Print Job - Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF8300 Basic Guide No.2:
Table of Contents

Advertisement

The printer stops during a print job

Phenomenon
An error message is shown on the
Display Screen
The printer ejects blank, unprinted
paper
Status
An error message is displayed
during printing.
The last portion of roll paper was
used during a print job, and paper
could not be advanced because
the trailing edge is taped to the roll.
The leading edge of the roll paper
was cut to straighten it.
The Printhead nozzles are
clogged.
A print job was received from an
incompatible printer driver.
The printer is damaged.
Corrective Action
Check the error message and take action as
necessary.
(→
, Error Messages)
Remove the used roll and insert a new roll.
(→
, Removing the Roll from the Printer)
(→"Removing the Roll Holder from Rolls," User
Manual)
(→"Loading and Printing on Rolls," User Manual)
The leading edge of rolls may be cut to straighten
it if you have selected Trim Edge First > On or
Automatic in the Control Panel menu.
(→"Cutting the Leading Edge of Roll Paper
Automatically," User Manual)
Print a test pattern to check the nozzles and make
sure the Printhead is in good condition for printing.
(→"Checking for Nozzle Clogging," User Manual)
Use the correct imagePROGRAF printer driver for the
printer and try printing again.
Contact your Canon dealer for assistance.
5
Troubleshooting

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents