Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual page 44

Large format printer
Hide thumbs Also See for imagePROGRAF iPF8300 Basic Guide No.2:
Table of Contents

Advertisement

Error Messages
Error Message
The paper is too small.
Replace paper with A4/LTR
(vertical) or larger
The paper is too small.
Replace roll with 10 in. wide or
larger roll.
Paper mismatch
Cause
The loaded paper is too small.
(When you are attempting to print
a test print sheet or other printer
status information.)
The loaded paper is too small.
(When you are attempting to print
a test print sheet or other printer
status information.)
You tried to print a test pattern
for printer adjustment on several
sheets, but sheets of different
types or sizes of paper were used.
Corrective Action
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper , press the
OK button, and remove the paper.
(→
, Removing Sheets)
2.
Switch to paper A4/Letter (vertical) or larger.
(→"Loading and Printing on Sheets," User Manual)
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Replace the roll with a roll 10 inches in width or larger
as follows.
1.
Press ▲ or ▼ to select Change Paper , and then
press the OK button to remove the roll.
(→
, Removing the Roll from the Printer)
(→"Removing the Roll Holder from Rolls," User
Manual)
2.
Replace the roll with a roll 10 inches wide or larger.
(→
, Attaching the Roll Holder to Rolls)
(→
, Loading Rolls in the Printer)
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
When printing a test pattern for adjustment, use
sheets of the same type of paper, in the required
quantity.
Press ▲ or ▼ to select Change Paper , press the OK
button, and replace the paper.
(→"Loading and Printing on Sheets," User Manual)
The printer now starts printing the test pattern.
Replace the paper as follows and perform adjustment
again.
1.
Press ▲ or ▼ to select Stop Printing , and then
press the OK button to stop printing.
2.
Replace the paper.
(→"Loading and Printing on Sheets," User Manual)
3.
Execute adjustment again from the control panel
menu.
44

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents