Changing The Is Mode Settings - Canon PowerShot D20 User Manual

Changing the IS Mode Settings

• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case,
set [IS Mode] to [Off].
Deactivating Powered IS
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected results
when used for the stronger camera shake that may occur when shooting
while walking or when moving the camera to match subject movement. In this
case, set Powered IS to [Off].
• [Powered IS] settings are not applied when [IS Mode] is set to [Off].
Still Images
Access the setting screen.
Press the n button, choose [IS Settings] on
the 4 tab (p. 42).
Configure the setting.
Choose [IS Mode], and then choose the
desired option (p. 42).
Optimal image stabilization for the
Continuous shooting conditions is automatically
applied (Intelligent IS) (p. 60).
Image stabilization is active only at the
Shoot Only*
moment of shooting.
Off Deactivates image stabilization.
*The setting is changed to [Continuous] for movie recording.
Follow the steps in "Changing the IS Mode
Settings" (p. 119) to access the [IS Settings]
screen.
Choose [Powered IS], and then choose [Off]
(p. 42).
Flash
Movies
Movies
119