Date And Time - Canon PowerShot D20 User Manual

• Adjusting the date or time while in
your [ Home] time and date.

Date and Time

Adjust the date and time as follows.
Metric/Non-Metric Display
Change the unit of measurement shown in the MF indicator (p. 110), zoom
bar (p. 55), and GPS altitude information (p. 48) from m/cm to ft/in as needed.
Adjusting Basic Camera Functions
Switch to the destination time
zone.
Press the op buttons to choose [
and then press the n button.
is now shown on the shooting screen
(p. 200).
mode (p. 21) will automatically update
Access the [Date/Time] screen.
Choose [Date/Time], and then press the m
button.
Configure the setting.
Press the qr buttons to choose an item, and
then press the op buttons to adjust the
setting.
Choose [Units], and then choose [ft/in].
World],
161