Trying The Camera Out - Canon PowerShot D20 User Manual

Trying the Camera Out

Follow these instructions to turn the camera on, shoot still images or movies,
and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
Red Mark
Still Images
Make sure the covers are closed.
Make sure that both the memory card/battery
cover lock and terminal cover lock return to
the positions shown, with the red marks no
longer visible.
If either cover is not fully closed, water may
enter the camera when it gets wet, which may
damage it.
Turn the camera on.
Press the power button.
The startup screen is displayed.
Enter A mode.
Press the o button, press the op buttons to
choose A, and then press the m button.
Icons representing the scene and image
stabilization mode are displayed in the upper
right of the screen.
Frames displayed around any subjects that
are detected indicate that they are in focus.
Movies
23