Set The Date And Time - Canon PowerShot D20 User Manual

Initial Preparations
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose
choose
20

Set the date and time.

Press the qr buttons to choose an option.
Press the op buttons to specify the date
and time.
When finished, press the m button.
Set the local time zone.
Press the qr buttons to choose your local
time zone.
Finish the setup process.
Press the m button when finished. After a
confirmation message, the setting screen is
no longer displayed.
To turn off the camera, press the power
button.
by pressing the op buttons.
in step 2 and then