Display Images - Canon PowerShot D20 User Manual

• Camera operating sounds are not played while the camera is connected to an
HDTV.
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
In this case, you will need to adjust some TV settings. For details, refer to the
TV user manual.
Configure the settings.
Press the n button, choose [Ctrl via
HDMI] on the 3 tab, and then choose
[Enable] (p. 42).
Connect the camera to the TV.
Follow steps 1 – 2 on p. 168 to connect the
camera to the TV.

Display images.

Turn on the TV. On the camera, press the 1
button.
Images from the camera are now displayed
on the TV. (Nothing is displayed on the
camera screen.)
Control the camera with the TV
remote.
Press the qr buttons on the remote to
browse images.
To display the camera control panel, press
the OK/Select button. Select control panel
items by pressing the qr buttons to choose
an item, and then pressing the OK/Select
button again.
Using Optional Accessories
169