Inserting The Battery And Memory Card - Canon PowerShot D20 User Manual

• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see "Specifications" in the Getting Started
guide.

Inserting the Battery and Memory Card

Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera (p. 157).
Terminals
Waterproof
Seal
Check the card's write-protect tab.
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
Open the cover.
Slide the switch (
( ).
Insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
Batteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Be careful not to damage the waterproof seal
Battery
when inserting the battery.
Lock
Initial Preparations
) and open the cover
17