Changing the IS Mode Settings
Deactivating Image Stabilization
When the camera is held still (as when shooting from a tripod), you should
set image stabilization to [Off] to deactivate it.
1
Access the setting screen.
●
Press the [
Settings] on the [
the [ ] button ( = 29).
2
Configure the setting.
●
Choose [IS Mode], and then choose the
desired option ( = 29).
Optimal image stabilization for the shooting conditions is
Continuous
automatically applied (Intelligent IS) ( = 37).
Off
Deactivates image stabilization.
Recording Movies with Subjects at the Same Size
Shown before Shooting
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for image straightening and correction
of significant camera shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization and cancel Auto Level.
] button, choose [IS
] tab, and then press
Still Images
●
Follow the steps in"Deactivating Auto
Level" ( = 52) to set [
[Disable].
●
Access the [IS Settings] screen as
described in step 1 in "Deactivating
Image Stabilization" ( = 53).
●
Choose [Dynamic IS], and then choose
[Low] ( = 53).
●
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
When [IS Mode] is set to [Off] ( = 53), [Dynamic IS] is not
●
available.
●
When the movie quality is [
], Dynamic IS is set to [Standard]
and cannot be changed.
Before Use
Basic Guide
Movies
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Auto level] to
4
P Mode
5
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
53